Web Menu

Product Search

Language

Industry News

Home / News / Industry News
News Category:
Industry News
Key Words:
  • How does the
    Oct 07，2024
    How does the "Thin Round Blade with Power Recovery" function work and how does it protect the skin from being scratched?

    1. Working PrincipleThin Round Blade Design:The Multifunction shaver's Thin blade adopts a thin and round shape. This design can fit the skin contour more closely and reduce friction and discomfort during shaving.Thin blades can cut hair more accurately and reduce the skin pressure caused by thick blades.Power Recovery Mechanism:When the blade encounters the skin during shaving, the power recovery mechanism is activated immediately.The mechanism uses a built-in spring or elastic element to make the blade produce a slight retraction action when it contacts the skin.This retraction action can reduce the pressure of the blade on the skin, thereby avoiding scratching the skin. 2. Ways to protect the skin from being scratchedReducing skin pressure:The power recovery mechanism reduces the risk of scratching the skin by reducing the pressure of the blade on the skin.Even in the case of improper use or operation errors, the blade will not cause serious damage to the skin.Fitting the skin contour:The design of the thin round blade allows it to fit the skin contour more closely, especially when dealing with curves and uneven areas.This fit reduces irritation and discomfort caused by friction between the blade and the skin.Precision Cutting Hairs:Thin blades are able to cut hairs more precisely, reducing skin damage caused by multiple cuts.This makes the shaving process more efficient while reducing skin irritation and damage.Safety Locking Mechanism:Some high-end razors may also be equipped with a safety locking mechanism to prevent the blade from popping out unexpectedly.This mechanism further enhances the safety of the product and reduces the risk of nicking the skin.

    VIEW FULL ARTICLE
  • How does the product's
    Sep 30，2024
    How does the product's "fine steel blade" ensure durability and corrosion resistance?

    1. Material selectionFine steel:The leg hair removal machine's balde is made of fine steel, which has high hardness and wear resistance. It can maintain the sharpness and integrity of the blade during long-term use and is not prone to wear or deformation.Anti-corrosion alloy: Some fine steel blades may also have anti-corrosion alloy elements added, such as chromium, nickel, etc. These elements can form a dense oxide film to effectively prevent the blade from rusting or corroding in a humid or corrosive environment.2. Manufacturing processPrecision machining: The blade undergoes precision machining and heat treatment processes to ensure the accuracy and sharpness of the blade, while improving the overall strength and toughness of the blade.Surface treatment technology: The surface of the blade may also use special treatment technologies, such as electroplating, spraying, etc., to further enhance its corrosion resistance and wear resistance. These treatment technologies can form a protective layer on the surface of the blade, effectively isolating air and moisture, and preventing corrosion and oxidation.3. Structural designReasonable blade design: The blade design of the blade head is reasonable, which can ensure uniform force during use and reduce the possibility of wear and damage.Easy to replace and maintain: The blade heads of some products are designed to be detachable, which is convenient for users to replace and maintain during use, thereby extending the service life of the entire product.4. Use and maintenanceCorrect use: Users should follow the operating specifications in the product manual during use to avoid damage to the blade head due to excessive or improper use.Regular cleaning and maintenance: Clean and maintain the blade head regularly to remove dirt and residue attached to the blade head to keep it clean and sharp.

    VIEW FULL ARTICLE
  • How will Shaver further revolutionize our shaving experience in the future?
    Sep 14，2024
    How will Shaver further revolutionize our shaving experience in the future?

    Cleaning and maintenance of Shaver is the key to ensuring its long-term and efficient operation. The traditional dry cleaning method relies on the included cleaning brush or soft cloth to help users easily remove stubble and dust from the blade head and blade net. This method is simple and fast, suitable for quick maintenance after daily use. However, with the development of technology, more and more Shavers have begun to support the full body water washing function, and users can directly put Shaver under running water to rinse for a deeper level of cleaning. This innovation not only improves the cleaning effect, but also greatly facilitates the user's operation.As one of the important indicators of Shaver performance, battery life is directly related to the user's experience. In the fast-paced modern life, the long-lasting Shaver can reduce the trouble of frequent charging and ensure that users can enjoy convenient shaving services anytime, anywhere. In order to improve battery life, we continue to explore new technologies, adopt large-capacity lithium-ion batteries, optimize battery management systems, and adopt energy-saving designs. At the same time, reasonable use and maintenance habits are also the key to extending Shaver's battery life.The Shaver industry will continue to seek breakthroughs in technological innovation and user experience. First of all, intelligence will become an irreversible trend. By integrating intelligent sensing technology, skin adaptability adjustment and other functions, Shaver will better understand the needs and skin conditions of users and provide a more personalized shaving experience. Secondly, environmental protection and sustainability will become an important direction for the development of the industry.

    VIEW FULL ARTICLE
  • How to ensure the sharpness of the hair trimmer's blade and the durability of the battery?
    Sep 14，2024
    How to ensure the sharpness of the hair trimmer's blade and the durability of the battery?

    The blade is the core component of the hair trimmer, and its condition directly affects the trimming effect and safety. Therefore, regular cleaning and maintenance of the blade is essential. After each use, the hair and dandruff on the blade should be cleaned in time. Use the small brush or cleaning brush that comes with it to gently brush away the debris in the direction of the blade. If the blade supports water washing, it can be rinsed under running water, but be sure to ensure that the motor part does not come into contact with water. After cleaning, wipe the blade dry with a clean towel or paper towel to avoid rust caused by residual moisture. The blade of some hair trimmers needs to be lubricated regularly. Use a special lubricant or a small amount of vaseline and gently apply it between the blade and the blade to keep the blade sharp and smooth. But be careful not to use too much lubricant to avoid affecting the cutting effect or contaminating clothes. Check the wear of the blade regularly. If you find that the blade is blunt or has a gap, you should replace it with a new blade in time. The replacement cycle of the hair trimmer blade of different brands and models may be different. It is recommended to refer to the product manual for accurate information. Timely replacement of worn heads can not only ensure the trimming effect, but also avoid unnecessary damage to the skin. The battery is the power source of the hair trimmer, and its performance directly affects the use time and convenience of the device. Therefore, proper battery maintenance is equally important.Use a dedicated charger to charge the hair trimmer, and avoid using non-original or substandard chargers. When charging, place the device in a ventilated and dry environment to avoid overheating or moisture. Control the charging time according to the product manual or the prompts of the charger indicator to avoid overcharging and battery damage. When the hair trimmer is not used for a long time, it is recommended to discharge and charge the battery at regular intervals to maintain battery activity. Avoid leaving the battery unused or charged for a long time to prevent the battery from self-discharging and causing power exhaustion and battery damage. Regularly check the appearance and connection parts of the battery for damage or corrosion. If there is a problem, it should be handled or replaced with a new battery in time. Pay attention to choosing a battery model and specification that matches the hair trimmer to ensure the normal operation of the device and extend its service life.

    VIEW FULL ARTICLE
  • Will using an eyebrow trimmer on a wet or slippery eyebrow area cause skin damage?
    Sep 14，2024
    Will using an eyebrow trimmer on a wet or slippery eyebrow area cause skin damage?

    When using an eyebrow trimmer, if the eyebrow area is wet or slippery, it can indeed increase the risk of skin damage. Slippery skin makes it difficult for the trimmer's blade to move steadily across the surface, leading to several potential issues. With wet skin, the trimmer's blade may not stay closely adhered to the skin and may slide during use. This sliding motion can cause the blade to scrape the skin, especially if the trimmer is not well-designed with anti-slip features or stability. A moist environment may also cause uneven friction on the skin, increasing the likelihood of minor cuts or irritation. Additionally, wet skin can make the trimmer less stable during use, resulting in less precise trimming outcomes. The trimmer might struggle to accurately capture and trim hair, leading to uneven eyebrows or small razor nicks. Even a well-designed trimmer may cause some skin irritation if used in a slippery environment due to reduced control. To avoid these potential issues, it's recommended to ensure the eyebrow area is dry before using the trimmer. Thoroughly drying the area helps the trimmer maintain stable contact with the skin, ensuring a better trimming result while minimizing the risk of skin damage. Keeping the eyebrow area dry allows the trimmer's blade to work more smoothly, leading to a more even and precise trim.

    VIEW FULL ARTICLE
  • Do different designs of facial shaver blades have varying effects on users' skin?
    Sep 14，2024
    Do different designs of facial shaver blades have varying effects on users' skin?

    The design of facial shaver blades significantly impacts the skin. Different blade designs not only determine the effectiveness of shaving but also directly influence skin comfort and health. Material and Shape of the Blades: Blades are typically made from materials such as stainless steel or titanium alloy, which affect sharpness and durability. Stainless steel blades generally provide good durability but may cause some irritation for sensitive skin. Titanium alloy blades are often gentler and better suited for sensitive skin due to their corrosion resistance, which reduces allergic reactions. The shape of the blades is also crucial; curved or floating blade designs can better conform to the skin's contours, reducing pulling and friction during shaving, thereby decreasing skin discomfort. Shaving Mechanism of the Blades: The design of the blades determines shaving efficiency and comfort. For instance, multi-blade designs gradually cut hair with each pass, reducing the force applied to the skin and minimizing irritation. In contrast, single-blade designs, while simpler, may require multiple passes, increasing friction and potential irritation. Protective Features of the Blades: Many modern shavers come with protective layers or lubricating strips near the blades. These features help reduce direct skin contact, preventing cuts during shaving. Lubricating strips release agents that reduce friction and make shaving smoother and more comfortable. Such designs are particularly beneficial for sensitive skin, effectively alleviating discomfort during shaving. Blade Speed and Vibration: The speed and vibration features of electric shavers also affect the shaving experience. High-speed shavers can complete the process faster but may increase friction on the skin. Adjusting to a moderate speed and using vibration features can help the blades conform better to the skin, reducing irritation. Shaving Method: The design of the blades also impacts the shaving method. The choice between wet and dry shaving is directly related to blade design. Shavers that support wet shaving can use shaving foam or gel to increase lubrication, reduce friction, and are more suitable for sensitive skin. Dry shaving is more convenient but may cause greater irritation.

    VIEW FULL ARTICLE